Everyone

ThanksMister LLC

Jelly Bean

MQTT Alarm Control Panel

Reuse and old Android devices as a home alarm control panel that integrates with Home Assistant or any home automation platform that supports MQTT messaging. 

MQTT Alarm Control Panel is an alarm control panel for use with home automation platforms that support MQTT messaging. The application was originally built for Home Assistant'sMQTT Manual Control Panel. However, the application can be used with any home automation platform that supports the MQTT messaging protocol such as Jeedom, openHab, or Node-Red.

The alarm control panel acts as an interface for your home alarm system and allows for two way communication using MQTT. You can set the alarm state to away or home, or disarm the alarm using a code. Your home automation system controls the sensors or automation that triggers the siren or notifies users of possible intrusion. 

Features
* Stream video, detect motion, detect faces, and read QR Codes.
* Capture and emailing images when the alarm is disabled.
MQTT commands to remotely control the application (speak text, play audio, display notifications, alerts).
* Device sensor data reporting over MQTT (temperature, light, pressure, battery, etc.).
* Day/Night mode themes based on MQTT sun value.
* Fingerprint unlock support to disable the alarm. (on supported devices).
* Optional screensaver mode using a digital clock or Imgur images.
* Three day MQTT Weather forecast.
* Home Automation Platform webpage support for viewing home automation dashboards.

The alarm panel is designed to be used as a dedicated device which runs continuously in full-screen mode. The alarm panel is open source and available on GitHub. There is also a version that runs on a Raspberry Pi using Android Things

For the complete setup instructions and additional information, please visit the Project Home Page. 

Home Assistant
Home Assistant's MQTT Manual Alarm Control Panel
Project's Home Page
Raspberry Pi Version
Support: mister@thanksmister.com
Panel Kawalan Penggera MQTT 

Gunakan semula dan peranti Android lama sebagai panel kawalan penggera rumah yang mengintegrasikan dengan Home Assistant atau mana-mana platform automasi rumah yang menyokong pemesejan MQTT.

Panel Kawalan Penggera MQTT adalah panel kawalan penggera untuk digunakan dengan platform automasi rumah yang menyokong pemesejan MQTT. Permohonan itu pada asalnya dibina untuk Pembantu Rumah Panel Kawalan Manual MQTT . Walau bagaimanapun, aplikasi itu boleh digunakan dengan mana-mana platform automasi rumah yang menyokong protokol mesej MQTT seperti Jeedom, openHab, atau Node-Red.

Panel kawalan penggera bertindak sebagai antara muka untuk sistem penggera rumah anda dan membolehkan komunikasi dua hala menggunakan MQTT. Anda boleh menetapkan keadaan penggera untuk pergi atau rumah, atau melucutkan senjata penggera menggunakan kod. Sistem automasi rumah anda mengawal sensor atau automasi yang mencetuskan siren atau memberitahu pengguna kemungkinan pencerobohan.

Ciri 
* Video aliran, mengesan gerakan, mengesan wajah, dan membaca Kod QR.
* Tangkap dan e-mel imej apabila penggera dinyahdayakan.
Perintah MQTT untuk mengendalikan aplikasi dari jauh (bercakap teks, main audio, pemberitahuan paparan, isyarat).
* Laporan data sensor peranti atas MQTT (suhu, cahaya, tekanan, bateri, dll).
* Tema mod Hari / Malam berdasarkan nilai matahari MQTT.
* Sokongan membuka kunci cap jari untuk melumpuhkan penggera. (pada peranti yang disokong).
* Mod screensaver pilihan menggunakan jam digital atau imej Imgur.
* Tiga hari MQTT Ramalan cuaca.
* Sokongan laman web Platform Otomasi Home untuk melihat papan pemuka otomatik rumah.

Panel penggera direka untuk digunakan sebagai peranti khusus yang berjalan secara berterusan dalam mod skrin penuh. Panel penggera adalah sumber terbuka dan tersedia di GitHub. Terdapat juga versi yang berjalan pada Raspberry Pi menggunakan Perkara Android

Untuk arahan persediaan yang lengkap dan maklumat tambahan, sila lawati Halaman Utama Projek .

Pembantu Rumah 
Panel Kawalan Penggera Manual MQTT Home Assistant 
Laman Utama Projek 
Raspberry Pi Version 
Sokongan: mister@thanksmister.com

MQTT Alarm Control Panel

Reuse and old Android devices as a home alarm control panel that integrates with Home Assistant or any home automation platform that supports MQTT messaging. 

MQTT Alarm Control Panel is an alarm control panel for use with home automation platforms that support MQTT messaging. The application was originally built for Home Assistant'sMQTT Manual Control Panel. However, the application can be used with any home automation platform that supports the MQTT messaging protocol such as Jeedom, openHab, or Node-Red.

The alarm control panel acts as an interface for your home alarm system and allows for two way communication using MQTT. You can set the alarm state to away or home, or disarm the alarm using a code. Your home automation system controls the sensors or automation that triggers the siren or notifies users of possible intrusion. 

Features
* Stream video, detect motion, detect faces, and read QR Codes.
* Capture and emailing images when the alarm is disabled.
MQTT commands to remotely control the application (speak text, play audio, display notifications, alerts).
* Device sensor data reporting over MQTT (temperature, light, pressure, battery, etc.).
* Day/Night mode themes based on MQTT sun value.
* Fingerprint unlock support to disable the alarm. (on supported devices).
* Optional screensaver mode using a digital clock or Imgur images.
* Three day MQTT Weather forecast.
* Home Automation Platform webpage support for viewing home automation dashboards.

The alarm panel is designed to be used as a dedicated device which runs continuously in full-screen mode. The alarm panel is open source and available on GitHub. There is also a version that runs on a Raspberry Pi using Android Things

For the complete setup instructions and additional information, please visit the Project Home Page. 

Home Assistant
Home Assistant's MQTT Manual Alarm Control Panel
Project's Home Page
Raspberry Pi Version
Support: mister@thanksmister.com

MQTT Alarm Control Panel

Versi Terkini MQTT Alarm Control Panel

Versi lain